{"product_id":"4000k-cob-led-chip-36v-13-5x13-5mm-replacement-for-haneco-detail-downlight","title":"4000K COB LED Chip 36V 13.5x13.5mm Replacement for Haneco Detail Downlight","description":"\u003cp dir=\"ltr\"\u003e\u003cstrong\u003eReplacement COB LED Chip for Haneco Detail 9W 4000K Downlight\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp dir=\"ltr\"\u003eIf just one of your Haneco Detail downlights has failed, replacing the chip is a good alternative to buying new downlights. When a downlight goes dark, flickers or dims while the driver still works, the COB chip is often the part that has failed. This chip is a suitable replacement for the 4000K COB used in the Haneco Detail 9W downlight, at a fraction of the cost of a new fitting.\u003c\/p\u003e\n\u003cp dir=\"ltr\"\u003e\u003cstrong\u003eWhy this chip\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul dir=\"ltr\"\u003e\n\u003cli\u003eRated to 600 mA, so at the 240 mA your driver supplies it’s lightly loaded and should run cooler and last longer than the original chip.\u003c\/li\u003e\n\u003cli\u003eIts higher lumens per watt means it could also be brighter than the original.\u003c\/li\u003e\n\u003cli\u003eColour temperature is 4000K, but it may not be an exact match to your existing downlights, so it’s best to replace pairs or groups together if the colour has to match.\u003c\/li\u003e\n\u003cli\u003eDimming depends on your driver. If the downlight dimmed before, this chip should still dim with it.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp dir=\"ltr\"\u003e\u003cstrong\u003eSpecifications\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul dir=\"ltr\"\u003e\n\u003cli\u003eType: COB LED chip on mirror aluminium base, 13.5 x 13.5 x 1.6 mm\u003c\/li\u003e\n\u003cli\u003eLight-emitting surface: Ø9.8 mm\u003c\/li\u003e\n\u003cli\u003eColour temperature: 4000K (neutral white), CRI 80+\u003c\/li\u003e\n\u003cli\u003eRated 36V typical, 600 mA maximum\u003c\/li\u003e\n\u003cli\u003e\u003cstrong\u003eSuits 36V 240 mA (about 9W) constant-current drivers\u003c\/strong\u003e\u003c\/li\u003e\n\u003cli\u003eOperating temperature: -40°C to +85°C (board temperature)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eChip only.\u003c\/strong\u003e Holder, driver, reflector, heatsink and housing are not included.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp dir=\"ltr\"\u003e\u003cstrong\u003eBefore you order\u003c\/strong\u003e\u003cbr\u003eCheck the old chip is 13.5 mm square with a Ø9.8 mm light-emitting surface, and that your driver is a constant-current type rated around 240 mA. Message us a photo of your old chip if you’re unsure.\u003c\/p\u003e\n\u003cp dir=\"ltr\"\u003e\u003cstrong\u003eFitting\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul dir=\"ltr\"\u003e\n\u003cli\u003e\n\u003cstrong\u003eSoldering:\u003c\/strong\u003e Keep the iron at or below 350°C and solder each joint for no more than 5 seconds. Avoid pressing on the yellow surface while you work.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eThermal paste:\u003c\/strong\u003e Spread a thin, even layer across the whole base of the chip so it sits flat against the heatsink, with no gaps or lumps. Poor contact is the main cause of early failure.\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Adelaide Electrical Salvage","offers":[{"title":"Default Title","offer_id":68297393242335,"sku":null,"price":30.0,"currency_code":"AUD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0707\/5731\/8879\/files\/Haneco_Detail.png?v=1792973733","url":"https:\/\/adelaideelectricalsalvage.com.au\/products\/4000k-cob-led-chip-36v-13-5x13-5mm-replacement-for-haneco-detail-downlight","provider":"Adelaide Electrical Salvage","version":"1.0","type":"link"}